844-535-1668

2001-09 FORD RANGER 2WD 6" LIFT KIT W/COIL (NON STABILITRAK) (V6)

 

2001-09 FORD RANGER 2WD 6" LIFT KIT W/COIL (NON STABILITRAK) (V6)

PRODUCT REF : K883053-6

The Maxtrac Suspension 6-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

SPECIFICATIONS

  • 2WD ONLY

    Front Component Boxes:
    - P/N: 703030B 4" 2wd Lift Spindles
    - P/N: 753020-6 2" Lift Coils
    - P/N: 1650SL-1 Maxtrac Front Shocks

    Rear Component Boxes:
    - P/N: 810030 3" Fabricated Lift Block
    - P/N: 910203L U-Bolts
    - P/N: 2650LL-9 Maxtrac Rear Shocks

    Wheel & Tire Fitment:
    - Will Clear a 32" Tire with a 3 3/4" back spacing or less

    NOTE:
    - Will NOT work on Stabilitrac


     WHY 2WD SPINDLES WILL NOT WORK ON 4WD

    ANSWERS ON BACKSPACING & SPINDLE / KNUCKLES